Can a Scored or Worn Brake Disc Be Machined on 2001 Jeep Cherokee?

A worn or scored disc brake can be machined by using a lathe with two cutter heads that cut both sides at once. Clean the place where the disc goes before installing it on the lathe, as machines made for one side can create a tapered surface. Trusting the disc to the hub/bearing is done best with a disc lathe attached to the vehicle's hub. Brake discs with thickness below the required value before or after machining should be replaced.

OEM 2001 Jeep Cherokee Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2001 Jeep Cherokee Rotor, Front Part Number: 5016434AA
$157.22 MSRP: $238.00
You Save: $80.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 17.00 Pounds
- Item Dimensions: 11.1 x 11.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016434AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Brake Disc Parts and Q&A

Q: Can a Scored or Worn Brake Disc Be Machined on 2001 Jeep Cherokee?
A: A worn or scored disc brake can be machined by using a lathe with two cutter heads that cut both sides at once. Clean the place where the disc goes before installing it on the lathe, as machines made for one side can create a tapered surface. Trusting the disc to the hub/bearing is done best with a disc lathe attached to the vehicle's hub. Brake discs with thickness below the required value before or after machining should be replaced.