OEM 2002 Chrysler PT Cruiser Antenna Cable

2002 Chrysler PT Cruiser Antenna Cable Parts and Q&A

• Q: How to Maintain and Fix an Antenna Cable on 2002 Chrysler PT Cruiser?

  A: You should first remove the connection from the battery's negative cable to handle the antenna cable. Unmount the antenna mast from the antenna by unscrewing it and drop the antenna fully on vehicles that do not have auto retractors. If the phone has it, remove the shroud and afterward take off the antenna nut and adapter. Disconnect the connection between the antenna body and the instrument panel. If the cable isn't long enough, remove the fender shield to get to the mounting nuts or bolts. After the fasteners are out, remove both the antenna and cable from the fender. When putting in the antenna, slot the antenna body and cable into the fender and securely tighten the screws to 7 Nm (75 in. lbs.). Connect one end of the antenna cable to the female connector on the instrument panel harness, place the other end through the fender hole and put the grommet into the panel where it fits. After that, replace the antenna nut and adapter, as well as the shroud if you have it and then install the inner fender shield. Next, attach the antenna mast, attach the antenna cable to the instrument panel and set the right side cowl trim panel in place after you disconnect the battery negative cable.