How to Service an Oil Pressure Switch on 2002 Chrysler PT Cruiser?

To maintain the oil pressure sensor in place, lift the vehicle and put an oil container underneath it. Unscrew electrical connector and take off switch. Install the new switch, reconnect the electrical connector, and lower the vehicle, and run the engine 2 minutes. Then check and regulate the oil level.

OEM 2002 Chrysler PT Cruiser Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Chrysler PT Cruiser Switch - Oil Pressure Part Number: 5149098AB
$38.57 MSRP: $55.60
You Save: $17.03 (31%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler PT Cruiser Submodels:
- Base, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2002 Chrysler PT Cruiser Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2002 Chrysler PT Cruiser?
A: To maintain the oil pressure sensor in place, lift the vehicle and put an oil container underneath it. Unscrew electrical connector and take off switch. Install the new switch, reconnect the electrical connector, and lower the vehicle, and run the engine 2 minutes. Then check and regulate the oil level.