How to Maintain a Front Wheel Speed Sensor on 2002 Dodge Dakota?

Before working on the front wheel speed sensor, tend to the vehicle with the wheels raised and held up. Remove the bolt holding the sensor onto the steering knuckle, then cut off the clamps on the sensor wire that attach it to the control arm and inner fender panel. Open the engine compartment, take off the sensor wire from the harness and take out the sensor. When replacing the front sensor, use the replacement bolts made at the factory, because they have unique features and they shouldn't be replaced with other bolts. Set up the sensor on the knuckle and then fasten the bolts that hold it in place with 21 Nm (190 inch lbs.) tightness. Instead of bending the wire under objects up front, route it away from the various underhood heat or moving sources. Don't forget to steer left and right using the steering wheel to check that the wire doesn't hit any part of the steering or suspension before removing the supports and lowering the vehicle.

OEM 2002 Dodge Dakota Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2002 Dodge Dakota ABS Sensor, Rear Part Number: 56028187AE
$64.56 MSRP: $96.75
You Save: $32.19 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear; Vehicle Speed Sensor; Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 56028187AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028187AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Dakota Speed Sensor, Front Passenger Side Part Number: 5016338AB
$91.31 MSRP: $105.00
You Save: $13.69 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 6.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016338AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Dakota Speed Sensor, Front Driver Side Part Number: 5016339AB
$103.36 MSRP: $119.00
You Save: $15.64 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Left; ABS Sensor; Front Speed Sensor
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.6 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016339AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Dakota Speed Sensor Parts and Q&A

Q: How to Maintain a Front Wheel Speed Sensor on 2002 Dodge Dakota?
A: Before working on the front wheel speed sensor, tend to the vehicle with the wheels raised and held up. Remove the bolt holding the sensor onto the steering knuckle, then cut off the clamps on the sensor wire that attach it to the control arm and inner fender panel. Open the engine compartment, take off the sensor wire from the harness and take out the sensor. When replacing the front sensor, use the replacement bolts made at the factory, because they have unique features and they shouldn't be replaced with other bolts. Set up the sensor on the knuckle and then fasten the bolts that hold it in place with 21 Nm (190 inch lbs.) tightness. Instead of bending the wire under objects up front, route it away from the various underhood heat or moving sources. Don't forget to steer left and right using the steering wheel to check that the wire doesn't hit any part of the steering or suspension before removing the supports and lowering the vehicle.