How to Service and Repair a Brake Light Switch on 2002 Dodge Durango?

The first step to servicing a brake switch is to disconnect its harness. After applying the brakes, slide the switch counterclockwise until the lock tab fits into the bracket's notch, then pull it rearward out of the mounting bracket and let go of the brake pedal. When placing the switch, press and hold the brake pedal down, place the tab from the switch against the notch in the bracket, push the switch in until it clicks and turn it clockwise 30 degrees to lock it. After that, attach the harness wires to the switch and let go of the brake pedal. After that, operate the release lever on the switch to trigger the switch plunger; the switch is now adjusted and will not move again.

OEM 2002 Dodge Durango Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
2002 Dodge Durango Parking Brake Switch, Black Part Number: 4221463
$18.50 MSRP: $27.20
You Save: $8.70 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Parking Brake; Electronic Parking Brake Control Switch; Parking Brake Warning Switch; Seat Adjuster, W/Bezel, Black Buttons, Woodgrain, W/Memory Opening.
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.5 x 1.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4221463
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Adventurer, Base, Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SE, SLT, SLT Plus, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, ST, SXT, SXT Plus, Special Service, Sport | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2002 Dodge Durango Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- SKU: 5083344AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Durango Brake Light Switch Parts and Q&A

Q: How to Service and Repair a Brake Light Switch on 2002 Dodge Durango?
A: The first step to servicing a brake switch is to disconnect its harness. After applying the brakes, slide the switch counterclockwise until the lock tab fits into the bracket's notch, then pull it rearward out of the mounting bracket and let go of the brake pedal. When placing the switch, press and hold the brake pedal down, place the tab from the switch against the notch in the bracket, push the switch in until it clicks and turn it clockwise 30 degrees to lock it. After that, attach the harness wires to the switch and let go of the brake pedal. After that, operate the release lever on the switch to trigger the switch plunger; the switch is now adjusted and will not move again.