How to Service an Air Bag Sensor for Side Impact on 2002 Jeep Grand Cherokee?

Before working on the side impact sensor, first take out the battery negative cable and let the system capacitor discharge for two minutes. Disconnect the air bag overlay wire harness from the sensor connector next to the lower right or left B-pillar and remove the trim. Unscrew the side impact sensor from the B-pillar with the two screws, then remove the sensor. During installation, affix the new side impact sensor onto the B-pillar using two screws that you need to tighten to 12 Nm (105 in. lbs.). Reconnect the wire harness from the air bag overlay to its connector and put the trim back onto the lower right or left B-pillar. You must not touch the battery's negative cable until the supplemental restraint system examination procedure is completed once any component of the supplemental restraint system has been serviced. Always treat the side impact sensor cautiously, because if you drop it, it might become damaged and you will have to fit a new sensor to guarantee proper air bag operation.

OEM 2002 Jeep Grand Cherokee Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
2002 Jeep Grand Cherokee Air Bag Sensor, Rear Part Number: 56010319AC
$88.80 MSRP: $195.00
You Save: $106.20 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Rear; Side Impact Sensor; Diagnostic Module
- Position: Rear
- Replaces: 56010319AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56010319AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Jeep Grand Cherokee Front Impact Sensor, Passenger Side Part Number: 56010410AC
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Sensor Air Bag
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.8 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56010410AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Jeep Grand Cherokee Front Impact Sensor, Driver Side Part Number: 56010411AC
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front Left; Air Bag Sensor; Sensor Air Bag
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56010411AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2002 Jeep Grand Cherokee Air Bag Sensor Parts and Q&A

Q: How to Service an Air Bag Sensor for Side Impact on 2002 Jeep Grand Cherokee?
A: Before working on the side impact sensor, first take out the battery negative cable and let the system capacitor discharge for two minutes. Disconnect the air bag overlay wire harness from the sensor connector next to the lower right or left B-pillar and remove the trim. Unscrew the side impact sensor from the B-pillar with the two screws, then remove the sensor. During installation, affix the new side impact sensor onto the B-pillar using two screws that you need to tighten to 12 Nm (105 in. lbs.). Reconnect the wire harness from the air bag overlay to its connector and put the trim back onto the lower right or left B-pillar. You must not touch the battery's negative cable until the supplemental restraint system examination procedure is completed once any component of the supplemental restraint system has been serviced. Always treat the side impact sensor cautiously, because if you drop it, it might become damaged and you will have to fit a new sensor to guarantee proper air bag operation.