How to Maintain and Fix a Neutral Safety Switch on 2002 Jeep Grand Cherokee?

To fix the Neutral Safety Switch, lift the car and put a drain pan under it. Disconnect and remove the switch, and center the operating lever fingers in the case. Install new seal, tighten to 34Nm, check for continuity, reattach wires, lower vehicle, top off transmission fluid.

OEM 2002 Jeep Grand Cherokee Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2002 Jeep Grand Cherokee Neutral Safety Switch Part Number: 56028181AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028181AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- 5.9 Limited, Laredo, Limited, Overland, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2002 Jeep Grand Cherokee Neutral Safety Switch Parts and Q&A

Q: How to Maintain and Fix a Neutral Safety Switch on 2002 Jeep Grand Cherokee?
A: To fix the Neutral Safety Switch, lift the car and put a drain pan under it. Disconnect and remove the switch, and center the operating lever fingers in the case. Install new seal, tighten to 34Nm, check for continuity, reattach wires, lower vehicle, top off transmission fluid.