Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Jeep Liberty ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2003 Jeep Liberty ABS Control Module - 5083084AA
    2003 Jeep Liberty ABS Control Module Diagram - 5083084AA
    View related parts

    2003 Jeep Liberty Control Module Part Number: 5083084AA

    Product Specifications
    • Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
    • Item Weight: 1.80 Pounds
    • Item Dimensions: 5.7 x 4.3 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5083084AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Jeep Liberty Submodels:
    • Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
  • 2003 Jeep Liberty ABS Control Module - 5083083AA
    2003 Jeep Liberty ABS Control Module Diagram - 5083083AA
    View related parts

    2003 Jeep Liberty Modulator Valve, Driver Side Part Number: 5083083AA

    Product Specifications
    • Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; Cowl Cover Seal, Left; ABS Control Module; ABS Control Unit; Cowl Grille Seal; Control Unit Anti-Lock Brake
    • Position: Driver Side
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5083083AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2003 Jeep Liberty Submodels:
    • Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2003 Jeep Liberty ABS Control Module Parts and Q&A

  • Q: How to Service and Repair an ABS Control Module in Antilock Brakes on 2003 Jeep Liberty?
    A: Start by putting a prop rod on the brake pedal to help pressure the brakes and afterwards remove the negative terminal from the battery. Once that's done, pinch the end of the Cab harness connector to release it and then unhook one brake line from the Hcu. With that done, unscrew the mounting nuts and bolt to pull out the Hcu/Cab. Any new Cab that is installed requires reprogramming with a Drbiii. Install the Hcu/Cab over the mounting studs and screw in the mounting nuts until you reach 14.1 Nm (125 in. lbs.). Following that, secure the brake lines to the Hcu and tighten them with a torque wrench to 180 in. lbs. Add the wiring harness to the Cab and push the release button on the connector down, then repeat with the negative battery cable before you begin bleeding the Abs brake system.

Related 2003 Jeep Liberty Parts

Alternate Year Models

+
2002 Jeep Liberty ABS Control Module 2004 Jeep Liberty ABS Control Module