OEM 2002 Jeep Wrangler Wiper Switch

Windshield Wiper Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Switches found

  • 2002 Jeep Wrangler Wiper Switch Diagram - 56007249
    View related parts
    Product Specifications
    • Other Name: Switch - Windshield Wiper; Back Glass Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch; Switch Windshield Wiper
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.5 x 2.5 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56007249
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
  • 2002 Jeep Wrangler Wiper Switch - 5016711AB
    2002 Jeep Wrangler Wiper Switch Diagram - 5016711AB
    View related parts
    Product Specifications
    • Other Name: Switch - Intermittent Wiper; Windshield Washer Switch; Front Wiper Switch; Switch Intermittent Wiper Right Stalk Includes Windshield Washer & Wiper Functions
    • Item Weight: 1.10 Pounds
    • Item Dimensions: 9.6 x 5.0 x 2.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5016711AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Wiper Switch Parts and Q&A

  • Q: How to Replace a Wiper Switch for the Rear Windshield on 2002 Jeep Wrangler?
    A: Turn off the air bags by disconnecting and isolating the negative battery cable and then wait at least two minutes to discharge the capacitor before you handle the switch and wiper. Firs, open the instrument panel and unscrew or pull the accessory switch bezel out. Pick out a thin and small screwdriver to carefully open the two snap clips on the rear wiper and washer switch on the back of the accessory switch bezel, then remove the switch. For installing the back wiper and washer switch, drop it into the proper spot behind the bezel and lightly push it to activate the snap retainers. After that, reattach the accessory switch bezel to the instrument panel and plug the battery negative cable back in.

Related 2002 Jeep Wrangler Parts