Other Name: Airbag - Leftside; Curtain Air Bag, Left; Head Air Bag; Air Bag Left Side
Position: Driver Side
Replaces: 4649109AB, 4649109AC
Item Weight: 5.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 4649109AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
2003 Chrysler Sebring Air Bag Parts and Q&A
Q: What Actions Are Necessary After an Air Bag Deployment on 2003 Chrysler Sebring?
A: Once the Driver air bag is deployed because of a collision, it and the Steering Wheel, Clock Spring Assembly and Complete Steering Column Assembly must all be taken out and replaced, while every other air bag and vehicle part should be checked for damage and replaced. Passenger air bag deployment means the Passenger air bag and Instrument Panel and Pad Assembly must be changed out and similar procedures should be applied to other parts of the vehicle. Should there be a Curtain air bag deployment, replace the curtains, headliner and the A, B and C-pillar trims on the deployed side, along with the Sas. Thoroughly check other car parts. Whenever the front air bags go off, Jr41 - Front Seat Belt Retractors (Both) with Tensioners and Jr27 - Front Seat Belt Buckles (Both) with Tensioners must be changed and any other seat belts should be inspected and replaced if they show damage, cuts, tears or fraying. To clean, fold or roll the air bag back into position and check if the rip can be covered by taping over the deployed air bag, if that is an option. Take a vacuum cleaner and remove any leftover powder inside the vehicle starting from the outside, always going in and remember to vacuum both the heater and A/c outlets. Should the heater or air conditioner be on in Recirc during air bag deployment, set the blower motor to low, vacuum any powder left behind and repeat until the area is clean.