Other Name: Tube - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
Position: Rear Passenger Side
Item Weight: 0.80 Pounds
Item Dimensions: 14.3 x 5.1 x 3.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52010290AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
2003 Dodge Durango Brake Line Parts and Q&A
Q: How Should You Service and Repair a Brake Line on 2003 Dodge Durango?
A: For servicing brake hoses and lines, using a preformed metal brake tube is recommended, but double-wall steel tube is allowed under emergency circumstances when the factory replacement is not available. Trim the damaged tube with a Tubing Cutter and remove any rough bits from the insides to make an ISO flare. After that, place the tube nut on the tube and fit the tube into the flaring tool so it is level with the highest point of the tool bar, then tighten the tool over the tube. Secure the right sized adaptor onto the flaring tool yoke screw and use lube on the adaptor. After that, put the adaptor and yoke screw through the tube and tighten it by turning the yoke screw until it is snug against the tool bar.