How to Service the Rear Brake Disc on 2003 Dodge Durango?

Raise the vehicle and place support under it, then remove the tire and wheel assembly. After that, eliminate the caliper adapter first and then take out the bolts to remove the caliper. Once those screws are set, take out the retaining clips and the disc assembly. The first step for installation is to put the disc onto the axle shaft. Next, fit the caliper adapter on top of it. Fasten the caliper adapter bolts to 135 Nm (100 ft. lbs) and then put the disc brake caliper back into place. Return the tire and wheel assembly together and make sure your vehicle is now on the ground.

OEM 2003 Dodge Durango Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2003 Dodge Durango Rotor, Front Part Number: 52010418AA
$22.49 MSRP: $28.51
You Save: $6.02 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Brake Rotor
- Position: Front
- Item Weight: 23.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52010418AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Brake Rotor, Rear Part Number: 52010415AA
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake
- Position: Rear
- Item Weight: 22.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010415AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Brake Disc Parts and Q&A

Q: How to Service the Rear Brake Disc on 2003 Dodge Durango?
A: Raise the vehicle and place support under it, then remove the tire and wheel assembly. After that, eliminate the caliper adapter first and then take out the bolts to remove the caliper. Once those screws are set, take out the retaining clips and the disc assembly. The first step for installation is to put the disc onto the axle shaft. Next, fit the caliper adapter on top of it. Fasten the caliper adapter bolts to 135 Nm (100 ft. lbs) and then put the disc brake caliper back into place. Return the tire and wheel assembly together and make sure your vehicle is now on the ground.