How to Service and Repair a Brake Master Cylinder on 2003 Dodge Durango?

First, pull the brake lines out of the brake master cylinder, separate the connection to the low fluid switch and remove the nuts holding the brake master cylinder. If you're installing a new brake master cylinder, remember to bleed it first. Attach the new brake master cylinder to the booster using the stud and mounting nuts tightened to 18 Nm (160 inch lbs.) and then tighten the brake lines to 19 Nm (170 inch lbs.). Finish up by reconnecting the low fluid level switch and then top up and release the base braking system.

OEM 2003 Dodge Durango Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2003 Dodge Durango Master Cylinder Part Number: 5093049AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.9 x 7.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Brake Master Cylinder Parts and Q&A

Q: How to Service and Repair a Brake Master Cylinder on 2003 Dodge Durango?
A: First, pull the brake lines out of the brake master cylinder, separate the connection to the low fluid switch and remove the nuts holding the brake master cylinder. If you're installing a new brake master cylinder, remember to bleed it first. Attach the new brake master cylinder to the booster using the stud and mounting nuts tightened to 18 Nm (160 inch lbs.) and then tighten the brake lines to 19 Nm (170 inch lbs.). Finish up by reconnecting the low fluid level switch and then top up and release the base braking system.