How to Maintain the Throttle Position Sensor on 2003 Dodge Neon?

To service the Throttle position sensor, disconnect the negative battery cable, loosen the air duct clamp and remove the air cleaner box. Take off and take away the sensor, install the new sensor. Tighten the bolt and nut, re-fitt the air duct and re-fit the battery cable.

OEM 2003 Dodge Neon Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2003 Dodge Neon Throttle Position Sensor Part Number: 4874430AB
$97.70 MSRP: $129.00
You Save: $31.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit - Throttle Position; Throttle Sensor; Sensor Kit Throttle Position
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 3.1 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4874430AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT, Sport | 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Throttle Position Sensor Part Number: 68405577AA
$152.76 MSRP: $231.00
You Save: $78.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68405577AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS

2003 Dodge Neon Throttle Position Sensor Parts and Q&A

Q: How to Maintain the Throttle Position Sensor on 2003 Dodge Neon?
A: To service the Throttle position sensor, disconnect the negative battery cable, loosen the air duct clamp and remove the air cleaner box. Take off and take away the sensor, install the new sensor. Tighten the bolt and nut, re-fitt the air duct and re-fit the battery cable.