Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Jeep Liberty ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2004 Jeep Liberty ABS Control Module - 5083084AA
    2004 Jeep Liberty ABS Control Module Diagram - 5083084AA
    View related parts

    2004 Jeep Liberty Control Module Part Number: 5083084AA

    Product Specifications
    • Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
    • Item Weight: 1.80 Pounds
    • Item Dimensions: 5.7 x 4.3 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5083084AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2004 Jeep Liberty Submodels:
    • Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
  • 2004 Jeep Liberty ABS Control Module - 5083083AA
    2004 Jeep Liberty ABS Control Module Diagram - 5083083AA
    View related parts

    2004 Jeep Liberty Modulator Valve, Driver Side Part Number: 5083083AA

    Product Specifications
    • Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; Cowl Cover Seal, Left; ABS Control Module; ABS Control Unit; Cowl Grille Seal; Control Unit Anti-Lock Brake
    • Position: Driver Side
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5083083AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2004 Jeep Liberty Submodels:
    • Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2004 Jeep Liberty ABS Control Module Parts and Q&A

  • Q: How to Service and Repair an ABS Control Module on 2004 Jeep Liberty?
    A: Remove negative battery cable after supporting the brakes with a prop rod to prevent fluid loss in the brake system; now proceed with the module maintenance. After that, pinch the release on the CAB harness connector to take out the connector and then remove the pump connector from the CAB. Remove the CAB mounting bolts and separate the CAB from the Housing Component Unit. To install, put the CAB onto the HCU, hold it firmly in place with the bolts and tighten these down to 2 Newton meters (16 inch-pounds). After that, plug the pump electrical connector into the CAB and then connect the wiring harness, making sure the release is pushed down to secure it. After that, catch the negative battery cable and reattach it to the battery; then pull the pushrod from the car.

Related 2004 Jeep Liberty Parts

Alternate Year Models

+
2003 Jeep Liberty ABS Control Module 2005 Jeep Liberty ABS Control Module