How to Service an Oil Pressure Switch on 2004 Dodge Dakota?

Removal of oil pressure sensor requires the negative battery cable to be disconnected and the vehicle raised. Take out the splash shield on the front and splash sender wire and splash sender. Installation involves reconnection of the sender wire, splash shield, lowering the vehicle and replacement of the battery cable.

OEM 2004 Dodge Dakota Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2004 Dodge Dakota Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Dakota Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2004 Dodge Dakota?
A: Removal of oil pressure sensor requires the negative battery cable to be disconnected and the vehicle raised. Take out the splash shield on the front and splash sender wire and splash sender. Installation involves reconnection of the sender wire, splash shield, lowering the vehicle and replacement of the battery cable.