How to Service an Oil Pressure Switch on 2005 Dodge Dakota?

First, open the hood, unhook the negative battery cable and raise the car using a hoist. With the front splash shield out, separate the oil pressure sender from its connector and then remove the pressure sender. Start by putting in the oil pressure sender and linking the oil pressure sender cable. Followed by this, hang the front splash shield back in its place, lower the vehicle and link the negative battery cable.

OEM 2005 Dodge Dakota Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Dodge Dakota Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2005 Dodge Dakota Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2005 Dodge Dakota?
A: First, open the hood, unhook the negative battery cable and raise the car using a hoist. With the front splash shield out, separate the oil pressure sender from its connector and then remove the pressure sender. Start by putting in the oil pressure sender and linking the oil pressure sender cable. Followed by this, hang the front splash shield back in its place, lower the vehicle and link the negative battery cable.