How to Locate, Remove, and Install a Vapor Canister on 2004 Dodge Dakota?

The EVAP canister is found below the car, set within the left frame rail, closer to the front of where the fuel tank is. Before getting rid of the tank, support the vehicle on stands and remove the hoses from the EVAP canister. Give special attention to the lines when you disconnect them. After that, take out the canister mounting nut and remove the canister from the bracket. To install the side canister, place the locating pins in the bracket grommets, add the mounting nut and tighten it to 17 - 24 N.m (150 - 210 in.lbs.). Next, link the vacuum lines together at the canister and lower the vehicle.

OEM 2004 Dodge Dakota Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2004 Dodge Dakota Vapor Canister Part Number: 52121500AB
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 2.60 Pounds
- Item Dimensions: 6.6 x 10.5 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52121500AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2004 Dodge Dakota Vapor Canister Part Number: 52000438AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52000438AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Dakota Submodels:
- Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS

2004 Dodge Dakota Vapor Canister Parts and Q&A

Q: How to Locate, Remove, and Install a Vapor Canister on 2004 Dodge Dakota?
A: The EVAP canister is found below the car, set within the left frame rail, closer to the front of where the fuel tank is. Before getting rid of the tank, support the vehicle on stands and remove the hoses from the EVAP canister. Give special attention to the lines when you disconnect them. After that, take out the canister mounting nut and remove the canister from the bracket. To install the side canister, place the locating pins in the bracket grommets, add the mounting nut and tighten it to 17 - 24 N.m (150 - 210 in.lbs.). Next, link the vacuum lines together at the canister and lower the vehicle.