How to Maintain and Fix an Exhaust Pipe on a 3.7L Engine on 2004 Dodge Dakota?

The first step is to raise and support the car, apply some Mopar Rust Penetrant to the bolts and nuts and wait for 5 minutes. You may disconnect the oxygen sensor(s) to avoid protection risks to the harness or sensor. Before you remove the exhaust pipe, take off the exhaust manifold-to-exhaust pipe nuts, remove the exhaust pipe to converter exhaust clamp and separate the exhaust pipe from the front flange of the catalytic converter. For installation, fasten the exhaust pipe(s) to the exhaust manifold and turn the nuts until they are tightened to 34 Nm (25 ft. lbs.). Attach the exhaust pipe to the catalytic converter flange, fasten it with an exhaust clamp and tighten the clamp nuts to 47 Nm (35 ft. lbs.). Connect all oxygen sensor wiring, lower the car and let it idle to find potential exhaust leaks. After that, check if there is contact between the exhaust and body panels and take care of any problems found.

OEM 2004 Dodge Dakota Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Pipes found

View related parts
2004 Dodge Dakota Muffler Part Number: 52103676AC
$106.34 MSRP: $204.00
You Save: $97.66 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler Exhaust
- Replaces: 52103676AB
- Item Weight: 22.00 Pounds
- Item Dimensions: 32.6 x 18.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52103676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS
View related parts
2004 Dodge Dakota Tail Pipe Part Number: 52855886AA
$388.96 MSRP: $592.00
You Save: $203.04 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tailpipe - Exhaust; Direct-Fit Exhaust System Kit; Resonator and Pipe Assembly; Tailpipe; Resonator And Tailpipe Exhaust; Tailpipe And Resonator Exhaust
- Replaces: 52013258AE, 52013258AF
- Item Weight: 25.50 Pounds
- Item Dimensions: 42.2 x 15.9 x 23.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855886AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Muffler Part Number: 52103677AD
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Muffler Exhaust
- Item Weight: 25.20 Pounds
- Item Dimensions: 37.3 x 10.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52103677AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Laramie, SLT, SLT Plus, ST, Sport, Sport Plus | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Muffler Part Number: 52103677AC
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler Exhaust
- Item Weight: 20.30 Pounds
- Item Dimensions: 32.6 x 10.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52103677AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Front Pipe Part Number: 52021744AC
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe, Front; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Extension Pipe
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021744AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Dakota Submodels:
- Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Front Pipe Part Number: 52021743AC
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe, Front; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Extension Pipe
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021743AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Dakota Submodels:
- Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Dakota Tail Pipe Part Number: 52013532AB
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Tail Pipe; Exhaust Pipe
- Item Weight: 10.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52013532AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Dakota Submodels:
- SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS

2004 Dodge Dakota Exhaust Pipe Parts and Q&A

Q: How to Maintain and Fix an Exhaust Pipe on a 3.7L Engine on 2004 Dodge Dakota?
A: The first step is to raise and support the car, apply some Mopar Rust Penetrant to the bolts and nuts and wait for 5 minutes. You may disconnect the oxygen sensor(s) to avoid protection risks to the harness or sensor. Before you remove the exhaust pipe, take off the exhaust manifold-to-exhaust pipe nuts, remove the exhaust pipe to converter exhaust clamp and separate the exhaust pipe from the front flange of the catalytic converter. For installation, fasten the exhaust pipe(s) to the exhaust manifold and turn the nuts until they are tightened to 34 Nm (25 ft. lbs.). Attach the exhaust pipe to the catalytic converter flange, fasten it with an exhaust clamp and tighten the clamp nuts to 47 Nm (35 ft. lbs.). Connect all oxygen sensor wiring, lower the car and let it idle to find potential exhaust leaks. After that, check if there is contact between the exhaust and body panels and take care of any problems found.