How to Service and Install a MAP Sensor on the Intake Manifold on 2004 Dodge Neon?

To replace the electrical connector, loosen the mounting screws, and remove the MAP sensor on the intake manifold. In installation, the sensor should be inserted very gently without damaging the O-ring of the sensor, the screws tighten the screws to 45 N-m (40 in lbs) when using a plastic manifold, and reconnecting the electrical connector.

OEM 2004 Dodge Neon MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2004 Dodge Neon M.A.P. Sensor Part Number: 5033224AB
$56.38 MSRP: $81.15
You Save: $24.77 (31%)
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Replaces: 5033224AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033224AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS

2004 Dodge Neon MAP Sensor Parts and Q&A

Q: How to Service and Install a MAP Sensor on the Intake Manifold on 2004 Dodge Neon?
A: To replace the electrical connector, loosen the mounting screws, and remove the MAP sensor on the intake manifold. In installation, the sensor should be inserted very gently without damaging the O-ring of the sensor, the screws tighten the screws to 45 N-m (40 in lbs) when using a plastic manifold, and reconnecting the electrical connector.