How to replace a Blend Door Actuator on 2004 Dodge Ram 2500?

To replace the blend door actuator, turn off the airbag system by disconnecting the battery negative cable. Remove the instrument panel, and disconnect the actuator(s). Take out the actuator(s) then install the new one(s) taking care of proper alignment. Reconnect all and tighten screws to 2 Nm (17 in. lbs.).

OEM 2004 Dodge Ram 2500 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2004 Dodge Ram 2500 Actuator Part Number: 5073983AA
Product Specifications
- Other Name: Actuator - A/C and Heater; HVAC Floor, Air Inlet, Heater Blend, and Blend Door Actuator.; Actuator A/C And Heater Includes: Lever, Bracket And Lever.
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.8 x 6.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073983AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Door Actuator Part Number: 4885206AB
$137.09 MSRP: $202.00
You Save: $64.91 (33%)
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 3.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885206AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2004 Dodge Ram 2500 Blend Door Actuator Parts and Q&A

Q: How to replace a Blend Door Actuator on 2004 Dodge Ram 2500?
A: To replace the blend door actuator, turn off the airbag system by disconnecting the battery negative cable. Remove the instrument panel, and disconnect the actuator(s). Take out the actuator(s) then install the new one(s) taking care of proper alignment. Reconnect all and tighten screws to 2 Nm (17 in. lbs.).