Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor; HVAC Blower Motor and Wheel; Blower Assembly; Motor Blower With Wheel Includes: Motor, Fan, Clamp, Screws, Seal.
Replaces: 5096256AA, 68031462AA
Item Weight: 5.30 Pounds
Item Dimensions: 10.4 x 10.2 x 10.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5096255AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
2004 Dodge Ram 2500 Blower Motor Parts and Q&A
Q: How to Safely Service the Blower Motor with the Airbag System Disabled on 2004 Dodge Ram 2500?
A: Disconnect the battery negative cable and leave it isolated for two minutes to service the blower motor on cars with air bags, as discharging the capacitor prevents accidental deployment. You do not have to remove the HVAC housing to get to the blower motor located under the instrument panel on the passenger side. Start by removing the wire harness connector from the blower motor and getting rid of the three screws that hold the blower motor to the HVAC housing. Move the motor around and tilt it as needed so that it comes out of the housing. To set up the blower motor, line it up with the HVAC body, attach it with all three screws tightened to 20 in. lbs., plug the wire harness in and reattach the negative cable to the battery to finish.