OEM 2004 Jeep Liberty Vapor Canister

2004 Jeep Liberty Vapor Canister Parts and Q&A

• Q: How to Service a Vapor Canister Near the Fuel Tank on 2004 Jeep Liberty?

  A: The EVAP canister is near the front of the fuel tank and next to the left/rear spring, so you need to lift your car for it to be serviced. You should begin by taking away the vacuum hoses and lines at the EVAP canister and marking where they are. After that, open both bolts holding the EVAP canister and mounting bracket to the body and then remove the bolt connecting the canister to the mounting bracket. Push both of the mounting pins out of the metal mounting bracket. Slide the two mounting pins into the bracket and attach the bolt on the canister bracket end. On the body, align the canister and bracket and lock them in place by tightening both mounting bracket bolts to 47 Nm (35 ft. lbs.) torque. Then, attach the vacuum hoses and lines once more to the EVAP canister and bring the vehicle back down to ground level.