How to Remove and Install the Intake Manifold Temperature Sensor on 2004 Jeep Wrangler?

The intake manifold temperature (IMT) sensor can be found at the back of the intake manifold plenum. Disconnect the electrical connector from the IMT sensor, then clear any dirt found at the sensor base in the intake manifold. After that, push down the little plastic tab then turn the sensor a quarter turn counterclockwise to remove it, checking if the O-ring is in good shape. When installing the sensor, check that the O-ring is in good shape and clean out the sensor hole in the intake manifold. Put the sensor in the intake manifold and twist it clockwise past the release tab, after which attach the electrical connector.

OEM 2004 Jeep Wrangler Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
2004 Jeep Wrangler Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Jeep Wrangler Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2004 Jeep Wrangler Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Remove and Install the Intake Manifold Temperature Sensor on 2004 Jeep Wrangler?
A: The intake manifold temperature (IMT) sensor can be found at the back of the intake manifold plenum. Disconnect the electrical connector from the IMT sensor, then clear any dirt found at the sensor base in the intake manifold. After that, push down the little plastic tab then turn the sensor a quarter turn counterclockwise to remove it, checking if the O-ring is in good shape. When installing the sensor, check that the O-ring is in good shape and clean out the sensor hole in the intake manifold. Put the sensor in the intake manifold and twist it clockwise past the release tab, after which attach the electrical connector.