How to Install and Remove a Throttle Position Sensor (TPS) on 2004 Jeep Wrangler?

The Throttle Position Sensor (TPS) is removed by disconnecting its electrical connector, and unscrewing it in. For installation purposes, make sure that the throttle shaft is installed in the TPS socket to rotate slightly. Tighten screws to 7 Nm and check if it is binding (by manual operation of the throttle) and install air cleaner tube.

OEM 2004 Jeep Wrangler Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2004 Jeep Wrangler Throttle Position Sensor Part Number: 68404428AA
$61.51 MSRP: $85.05
You Save: $23.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 5019411AD, 5019411AB, 5019411AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68404428AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2004 Jeep Wrangler Throttle Position Sensor Parts and Q&A

Q: How to Install and Remove a Throttle Position Sensor (TPS) on 2004 Jeep Wrangler?
A: The Throttle Position Sensor (TPS) is removed by disconnecting its electrical connector, and unscrewing it in. For installation purposes, make sure that the throttle shaft is installed in the TPS socket to rotate slightly. Tighten screws to 7 Nm and check if it is binding (by manual operation of the throttle) and install air cleaner tube.