How to Remove and Install the Intake Manifold Temperature Sensor on 2003 Jeep Wrangler?

To remove the intake manifold temperature (IMT) sensor, disconnect the electrical connector, clean the area, move the release tab upward, and rotate the sensor 1/4 turn anti-clockwise. For installation, it should check the O-ring and clean the mounting hole, install the sensor, rotate the sensor clockwise, and reconnect the electrical connector.

OEM 2003 Jeep Wrangler Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
2003 Jeep Wrangler Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Wrangler Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Remove and Install the Intake Manifold Temperature Sensor on 2003 Jeep Wrangler?
A: To remove the intake manifold temperature (IMT) sensor, disconnect the electrical connector, clean the area, move the release tab upward, and rotate the sensor 1/4 turn anti-clockwise. For installation, it should check the O-ring and clean the mounting hole, install the sensor, rotate the sensor clockwise, and reconnect the electrical connector.