How to Service and Repair Coil Springs on 2005 Chrysler Crossfire?

To work on the rear coil spring, start by lifting the vehicle and supporting it and then take out the wheel and tire. After that, remove the bolts holding down the cover on the control arm and take out the bolts attached to the lower control arm's lower shock bolts. Secure the lower control arm at the rear suspension with the correct lifting device and rise it until the half shaft is lying on its side. Put a 9152 compressor plate onto the suspension bottom and 9150 spring compressors below the center strut to compress the rear spring. After that, colored technique, in this case, paints on the surface rather than filling in cracks; this won't stress the paint and can be easily repaired later without repainting. Lower the control arm to pull out the rear spring and take it off the vehicle. Place back the spring, raise the control arm and secure it to the frame with a bolt. Free the spring and fit it into place so the lower mount lines up with the spring perches and place and tighten the lower shock mount onto the lower control arm to 55 NM or 41 ft. lbs. After that, replace the cover and bolts on the control arm, fit the wheel and tire and make sure vehicle alignment is correct.

OEM 2005 Chrysler Crossfire Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Coil Springs found

View related parts
2005 Chrysler Crossfire Coil Spring, Front Part Number: 5161527AA
$191.71 MSRP: $243.03
You Save: $51.32 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front Coil; Coil Springs; Spring; Spring Front Coil
- Position: Front
- Item Weight: 9.20 Pounds
- Item Dimensions: 13.4 x 13.3 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161527AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Coil Spring, Front Part Number: 5142010AA
Product Specifications
- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Springs; Spring; Spring Front Coil
- Position: Front
- Item Weight: 7.60 Pounds
- Item Dimensions: 13.7 x 4.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142010AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Coil Spring, Front Part Number: 5135480AA
Product Specifications
- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Springs; Spring; Spring Front Coil
- Position: Front
- Item Weight: 8.30 Pounds
- Item Dimensions: 16.0 x 8.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135480AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Coil Spring, Rear Part Number: 5142012AA
Product Specifications
- Other Name: Spring - Rear; Coil Springs; Spring
- Position: Rear
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.7 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142012AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Coil Spring, Rear Part Number: 5102299AA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring; Spring Rear
- Position: Rear
- Item Weight: 5.90 Pounds
- Item Dimensions: 13.8 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102299AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Coil Springs Parts and Q&A

Q: How to Service and Repair Coil Springs on 2005 Chrysler Crossfire?
A: To work on the rear coil spring, start by lifting the vehicle and supporting it and then take out the wheel and tire. After that, remove the bolts holding down the cover on the control arm and take out the bolts attached to the lower control arm's lower shock bolts. Secure the lower control arm at the rear suspension with the correct lifting device and rise it until the half shaft is lying on its side. Put a 9152 compressor plate onto the suspension bottom and 9150 spring compressors below the center strut to compress the rear spring. After that, colored technique, in this case, paints on the surface rather than filling in cracks; this won't stress the paint and can be easily repaired later without repainting. Lower the control arm to pull out the rear spring and take it off the vehicle. Place back the spring, raise the control arm and secure it to the frame with a bolt. Free the spring and fit it into place so the lower mount lines up with the spring perches and place and tighten the lower shock mount onto the lower control arm to 55 NM or 41 ft. lbs. After that, replace the cover and bolts on the control arm, fit the wheel and tire and make sure vehicle alignment is correct.