How to Properly Remove and Install a Wheel Cover on 2005 Chrysler PT Cruiser?

You should use a hand wrench to unthread the 5 nuts keeping the wheel cover in place, because using an impact wrench may damage the retaining nuts. Pull the wheel cover straight out from the wheel to get it off. To mount the wheel cover, line up the inner edge of the notch on the valve with the valve stem and attach the holding nuts on the wheel over the externally threaded wheel nuts. Rotate each wheel cover retaining nut on top of the wheel nuts by hand. Always use a hand wrench to tighten the retaining nuts so you do not harm them. Make sure the wheel cover won't rattle by tightening all five retaining nuts correctly. After applying the specified pattern, tighten each retaining nut one by one in the same way, at least once more. Anytime a nut slips, tighten all of them one more time, following the original sequence, before they reach the point of thread slip.

OEM 2005 Chrysler PT Cruiser Wheel Cover

Wheel Protector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Covers found

View related parts
2005 Chrysler PT Cruiser Center Cap Part Number: 4782867AA
$10.85 MSRP: $15.00
You Save: $4.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782867AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Center Cap Part Number: 5272812AA
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.0 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272812AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Wheel Cover Part Number: 5272360AB
Product Specifications
- Other Name: Cover - Wheel; Wheel Center Cap; Cover Wheel
- Replaces: 5272360AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 17.0 x 17.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272360AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Center Cap Part Number: XP21ZDJAA
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Item Weight: 0.80 Pounds
- Item Dimensions: 2.4 x 2.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XP21ZDJAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2005 Chrysler PT Cruiser Wheel Cover Parts and Q&A

Q: How to Properly Remove and Install a Wheel Cover on 2005 Chrysler PT Cruiser?
A: You should use a hand wrench to unthread the 5 nuts keeping the wheel cover in place, because using an impact wrench may damage the retaining nuts. Pull the wheel cover straight out from the wheel to get it off. To mount the wheel cover, line up the inner edge of the notch on the valve with the valve stem and attach the holding nuts on the wheel over the externally threaded wheel nuts. Rotate each wheel cover retaining nut on top of the wheel nuts by hand. Always use a hand wrench to tighten the retaining nuts so you do not harm them. Make sure the wheel cover won't rattle by tightening all five retaining nuts correctly. After applying the specified pattern, tighten each retaining nut one by one in the same way, at least once more. Anytime a nut slips, tighten all of them one more time, following the original sequence, before they reach the point of thread slip.