How to Service and Repair an A/C Hose Suction Line on 2005 Chrysler Sebring?

First, you should remove and separate the negative battery cable and then retain the refrigerant inside the HVAC system. Lose the bolt from the suction line on the A/C compressor, take the suction line off and get rid of the O-ring. Put plugs over the suction line and compressor fittings, un-tape the lines in the engine bay, take out the bolt holding the refrigerant line bracket to the shock tower and pull the suction line from the bracket. After that, remove the screw attaching the refrigerant line tapping plate to the expansion valve, separate the suction and liquid lines from the valve and toss out the O-ring seals. Again, make sure the headwise ports and liquid line fittings are sealed, as is the engine side of the expansion valves. Attach the suction line termination into the engine compartment and take away the tape or plug from each of the ports and fittings. New rubber O-ring seals should be lubricated with clean R-134a refrigerant oil before being installed on the ends of the liquid and suction lines, using only the approved O-ring and oil for the A/C compressor system. Fit the liquid and suction line fittings onto the A/C expansion valve, carefully place the suction line into the retainer bracket and mount the bracket on the right side of the shock tower with the bolt. After removing the tape or plugs from the suction line fitting and compressor port, rub some clean refrigerant oil on the new rubber O-ring seal and put it on the suction line fitting. Attach the suction line with the bolt firmly and tighten it to 22 N.m (16 ft. lbs.). After that, attach the negative cable to the battery. Afterward, move the system and recharge it with the refrigerant gas.

OEM 2005 Chrysler Sebring A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 A/C Hoses found

View related parts
2005 Chrysler Sebring Liquid Line Part Number: 4596536AG
$131.49 MSRP: $231.00
You Save: $99.51 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Refrigerant Hose; A/C Accumulator; Accumulator; A/C Hose; Line A/C Liquid With Receiver Drier
- Replaces: 4596536AF, 4596536AC, 4596536AB, 4596536AD
- Item Weight: 1.60 Pounds
- Item Dimensions: 27.0 x 16.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596536AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Discharge Hose Part Number: MR958426
$21.40 MSRP: $27.12
You Save: $5.72 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose A/C Discharge
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR958426
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler Sebring Suction Hose Part Number: 4596551AC
$88.17 MSRP: $102.00
You Save: $13.83 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line
- Replaces: 4596551AB
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596551AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Discharge Hose Part Number: 4596553AD
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line
- Replaces: 4596553AB, 4596553AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 19.5 x 4.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596553AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Suction Hose Part Number: MR958428
Product Specifications
- Other Name: Hose - Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose Suction
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR958428
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler Sebring Discharge Hose Part Number: MR958427
Product Specifications
- Other Name: Hose - A/C Discharge; A/C Refrigerant Discharge Hose; Hose A/C Discharge
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR958427
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Suction Hose Part Number: MR460495
Product Specifications
- Other Name: Hose - Suction; A/C Refrigerant Suction Hose; Hose Suction
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR460495
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Discharge Hose Part Number: 4596555AD
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line
- Replaces: 4596555AB, 4596555AC
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596555AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Discharge Hose Part Number: 4596451AD
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line
- Replaces: 4596451AB, 4596451AC
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596451AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Suction Hose Part Number: 4596552AD
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line
- Replaces: 4596552AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 40.0 x 13.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4596552AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2005 Chrysler Sebring A/C Hose Parts and Q&A

Q: How to Service and Repair an A/C Hose Suction Line on 2005 Chrysler Sebring?
A: First, you should remove and separate the negative battery cable and then retain the refrigerant inside the HVAC system. Lose the bolt from the suction line on the A/C compressor, take the suction line off and get rid of the O-ring. Put plugs over the suction line and compressor fittings, un-tape the lines in the engine bay, take out the bolt holding the refrigerant line bracket to the shock tower and pull the suction line from the bracket. After that, remove the screw attaching the refrigerant line tapping plate to the expansion valve, separate the suction and liquid lines from the valve and toss out the O-ring seals. Again, make sure the headwise ports and liquid line fittings are sealed, as is the engine side of the expansion valves. Attach the suction line termination into the engine compartment and take away the tape or plug from each of the ports and fittings. New rubber O-ring seals should be lubricated with clean R-134a refrigerant oil before being installed on the ends of the liquid and suction lines, using only the approved O-ring and oil for the A/C compressor system. Fit the liquid and suction line fittings onto the A/C expansion valve, carefully place the suction line into the retainer bracket and mount the bracket on the right side of the shock tower with the bolt. After removing the tape or plugs from the suction line fitting and compressor port, rub some clean refrigerant oil on the new rubber O-ring seal and put it on the suction line fitting. Attach the suction line with the bolt firmly and tighten it to 22 N.m (16 ft. lbs.). After that, attach the negative cable to the battery. Afterward, move the system and recharge it with the refrigerant gas.