How to Maintain a Seat Heater Switch on 2005 Dodge Dakota?

Removing the seat heater switch starts with disconnecting and isolating the battery's negative cable. Pry the heated seat switch out of the console slowly using a tool that won't damage the unit or the material. Take apart the switch electrical connector and get rid of the heated seat switch in the automobile. To install the switch, plug in its electrical connector and set it down into the hole in the center console until it is firm. Once all is done, put the battery negative cable back and observe that the heated seat works as it should.

OEM 2005 Dodge Dakota Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2005 Dodge Dakota Seat Heat Switch, Driver Side Part Number: 56045099AC
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045099AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Dakota Seat Heat Switch, Passenger Side Part Number: 56045098AC
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045098AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS

2005 Dodge Dakota Seat Heater Switch Parts and Q&A

Q: How to Maintain a Seat Heater Switch on 2005 Dodge Dakota?
A: Removing the seat heater switch starts with disconnecting and isolating the battery's negative cable. Pry the heated seat switch out of the console slowly using a tool that won't damage the unit or the material. Take apart the switch electrical connector and get rid of the heated seat switch in the automobile. To install the switch, plug in its electrical connector and set it down into the hole in the center console until it is firm. Once all is done, put the battery negative cable back and observe that the heated seat works as it should.