How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2005 Dodge Dakota?

You can locate the fuel pump relay in the Power Distribution Center (PDC) and its place is marked with a label on the PDC cover. Remove the cover of the PDC and then get the relay out of the PDC. Check the relays as well as the PDC connector terminals for any signs of damage or corrosion and do the required repairs before reinstalling the relay. Check that the pins are all the same height and fix them when necessary before you proceed with installation. Put the relay back where it belongs in the PDC, reinstall the cover and then secure it.

OEM 2005 Dodge Dakota Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2005 Dodge Dakota Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2005 Dodge Dakota Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2005 Dodge Dakota?
A: You can locate the fuel pump relay in the Power Distribution Center (PDC) and its place is marked with a label on the PDC cover. Remove the cover of the PDC and then get the relay out of the PDC. Check the relays as well as the PDC connector terminals for any signs of damage or corrosion and do the required repairs before reinstalling the relay. Check that the pins are all the same height and fix them when necessary before you proceed with installation. Put the relay back where it belongs in the PDC, reinstall the cover and then secure it.