How to Maintain the Left Exhaust Manifold on 2005 Dodge Durango?

Before servicing the left exhaust manifold, unplug the negative terminal from the battery and raise the vehicle to reach it. Drop the coupling bolts that fix the exhaust pipe to the engine exhaust manifold and then lower the vehicle. In the next step, disconnect the exhaust heat shields, take out the bolts, nuts and washers and then remove both the manifold and the gasket. If the studs cracked and broke when you removed the old manifold, screw in replacements with sealer on the coarse sides to avoid leaking. Set the engine exhaust manifold and the gasket onto the two cylinder head studs and fit conical washers and nuts onto these same studs. Attach the upper and lower conical washers, preserving their order and tighten all the bolts and nuts to 25 Nm (18 ft. lbs.) at the center before moving toward the outermost parts. Put on the exhaust heat shields again and fasten them tightly but not too much to stop them from getting deformed or damaged. After that, connect the exhaust pipe to the manifold and tighten the bolts, nuts and retainers until you reach 34 Nm (25 ft. lbs.) of torque.

OEM 2005 Dodge Durango Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Manifolds found

View related parts
2005 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032418AE
$236.53 MSRP: $491.00
You Save: $254.47 (52%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032418AD, 53032418AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032418AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032437AD
$493.09 MSRP: $892.00
You Save: $398.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Replaces: 53032437AB
- Item Weight: 10.00 Pounds
- Item Dimensions: 22.8 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032437AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53030809AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 6.9 x 6.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030809AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53030808AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Exhaust Manifold Gasket; Manifold Gasket; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.9 x 8.1 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032198AZ
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032198AE
- Item Weight: 10.60 Pounds
- Item Dimensions: 21.9 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032198AZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032197AY
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032197AE
- Item Weight: 9.60 Pounds
- Item Dimensions: 22.9 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032197AY
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Limited, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032613AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032613AB, 53032613AC, 53032613AA
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.3 x 12.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032613AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2005 Dodge Durango Exhaust Manifold Parts and Q&A

Q: How to Maintain the Left Exhaust Manifold on 2005 Dodge Durango?
A: Before servicing the left exhaust manifold, unplug the negative terminal from the battery and raise the vehicle to reach it. Drop the coupling bolts that fix the exhaust pipe to the engine exhaust manifold and then lower the vehicle. In the next step, disconnect the exhaust heat shields, take out the bolts, nuts and washers and then remove both the manifold and the gasket. If the studs cracked and broke when you removed the old manifold, screw in replacements with sealer on the coarse sides to avoid leaking. Set the engine exhaust manifold and the gasket onto the two cylinder head studs and fit conical washers and nuts onto these same studs. Attach the upper and lower conical washers, preserving their order and tighten all the bolts and nuts to 25 Nm (18 ft. lbs.) at the center before moving toward the outermost parts. Put on the exhaust heat shields again and fasten them tightly but not too much to stop them from getting deformed or damaged. After that, connect the exhaust pipe to the manifold and tighten the bolts, nuts and retainers until you reach 34 Nm (25 ft. lbs.) of torque.