How to Remove and Install Exhaust Manifolds on 2004 Dodge Durango?

To get at the right exhaust manifold, unplug the negative battery cable, raise the vehicle and loosen the bolts and fasteners joining the exhaust pipe to the engine exhaust manifold. Before removing anything else, first bring the truck down, then remove the heat shield before the manifold can be unbolted. Similarly, for the left exhaust manifold, you should remove the negative cable from the battery, raise the car, take off the exhaust pipe, lower it, take away the heat shields, remove all the bolts and washers and pull out the manifold and gasket. In case the nuts and studs came out from the manifold as you pulled it out, put in new studs with a sealer on the water outlet side to stop water seeping in. Apply conical washers and nuts to the two studs on the cylinder head, place the manifold and gasket over them and tighten the bolts and nuts to 25 Nm (18 ft. lbs.) torque, going from the center to the outer side of the cylinder head. Add the heat shields around the exhaust system, use stands to support and raise the vehicle and do not tighten too hard to stop the shields from bending. Then, join the exhaust pipe to the manifold, using bolts, nuts and retainers and tighten them to 34 Nm (25 ft. lbs.) torque. Perform the installation of the left exhaust manifold exactly as before, if not already sealed, put sealer on the new studs.

OEM 2004 Dodge Durango Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Manifolds found

View related parts
2004 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032418AE
$236.53 MSRP: $491.00
You Save: $254.47 (52%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032418AD, 53032418AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032418AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032437AD
$493.09 MSRP: $892.00
You Save: $398.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Replaces: 53032437AB
- Item Weight: 10.00 Pounds
- Item Dimensions: 22.8 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032437AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53030809AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 6.9 x 6.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030809AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53030808AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Exhaust Manifold Gasket; Manifold Gasket; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.9 x 8.1 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032443AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Item Weight: 8.80 Pounds
- Item Dimensions: 23.5 x 6.7 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032443AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST | 8 Cyl 4.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032198AZ
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032198AE
- Item Weight: 10.60 Pounds
- Item Dimensions: 21.9 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032198AZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032417AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032417AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Durango Submodels:
- SLT, ST | 6 Cyl 3.7 L GAS
View related parts
2004 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032197AY
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032197AE
- Item Weight: 9.60 Pounds
- Item Dimensions: 22.9 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032197AY
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST | 8 Cyl 5.7 L GAS

2004 Dodge Durango Exhaust Manifold Parts and Q&A

Q: How to Remove and Install Exhaust Manifolds on 2004 Dodge Durango?
A: To get at the right exhaust manifold, unplug the negative battery cable, raise the vehicle and loosen the bolts and fasteners joining the exhaust pipe to the engine exhaust manifold. Before removing anything else, first bring the truck down, then remove the heat shield before the manifold can be unbolted. Similarly, for the left exhaust manifold, you should remove the negative cable from the battery, raise the car, take off the exhaust pipe, lower it, take away the heat shields, remove all the bolts and washers and pull out the manifold and gasket. In case the nuts and studs came out from the manifold as you pulled it out, put in new studs with a sealer on the water outlet side to stop water seeping in. Apply conical washers and nuts to the two studs on the cylinder head, place the manifold and gasket over them and tighten the bolts and nuts to 25 Nm (18 ft. lbs.) torque, going from the center to the outer side of the cylinder head. Add the heat shields around the exhaust system, use stands to support and raise the vehicle and do not tighten too hard to stop the shields from bending. Then, join the exhaust pipe to the manifold, using bolts, nuts and retainers and tighten them to 34 Nm (25 ft. lbs.) torque. Perform the installation of the left exhaust manifold exactly as before, if not already sealed, put sealer on the new studs.