How to Maintain the Left Exhaust Manifold on 2006 Dodge Durango?

Before servicing the left exhaust manifold, first take off the negative cable from the battery and lift and support the car. First, remove the bolts and nuts from the exhaust pipe to the engine exhaust manifold and then slowly lower the vehicle. Then, take out the exhaust heat shields, undo the nuts and bolts that hold the manifold to the cylinder head and remove the manifold and its gasket. Should you discover tough-to-remove nuts, clean up and secure studs and put sealer on the threading after installation. Adjust the engine exhaust manifold and its gasket on the cylinder head, located on each of two studs and add conical washers and nuts. Attach all conical washers remaining and tighten the bolts and nuts to 25 Nm (18 ft. lbs.). Start with the ones in the center arm and proceed outward. Replace the exhaust heat shields and make sure the fasteners aren't too tight so they may not crack or bend due to pressure. For the final step, put the exhaust pipe on the manifold and attach it using bolts, nuts and retainers, tightening everything to 34 Nm (25 ft. lbs.) torque.

OEM 2006 Dodge Durango Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2006 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032418AE
$236.53 MSRP: $491.00
You Save: $254.47 (52%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032418AD, 53032418AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032418AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2006 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032437AD
$493.09 MSRP: $892.00
You Save: $398.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Replaces: 53032437AB
- Item Weight: 10.00 Pounds
- Item Dimensions: 22.8 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032437AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53030809AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 6.9 x 6.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030809AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53030808AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Exhaust Manifold Gasket; Manifold Gasket; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.9 x 8.1 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Durango Exhaust Manifold, Passenger Side Part Number: 53032198AZ
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032198AE
- Item Weight: 10.60 Pounds
- Item Dimensions: 21.9 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032198AZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Exhaust Manifold, Driver Side Part Number: 53032613AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032613AB, 53032613AC, 53032613AA
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.3 x 12.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032613AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- SE, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2006 Dodge Durango Exhaust Manifold Parts and Q&A

Q: How to Maintain the Left Exhaust Manifold on 2006 Dodge Durango?
A: Before servicing the left exhaust manifold, first take off the negative cable from the battery and lift and support the car. First, remove the bolts and nuts from the exhaust pipe to the engine exhaust manifold and then slowly lower the vehicle. Then, take out the exhaust heat shields, undo the nuts and bolts that hold the manifold to the cylinder head and remove the manifold and its gasket. Should you discover tough-to-remove nuts, clean up and secure studs and put sealer on the threading after installation. Adjust the engine exhaust manifold and its gasket on the cylinder head, located on each of two studs and add conical washers and nuts. Attach all conical washers remaining and tighten the bolts and nuts to 25 Nm (18 ft. lbs.). Start with the ones in the center arm and proceed outward. Replace the exhaust heat shields and make sure the fasteners aren't too tight so they may not crack or bend due to pressure. For the final step, put the exhaust pipe on the manifold and attach it using bolts, nuts and retainers, tightening everything to 34 Nm (25 ft. lbs.) torque.