How to Check Clearances and Install a Piston Ring Set on 2005 Dodge Durango?

Clean the cylinder bore and insert the ring 12mm below the bottom before re-installing or installing new rings, and checking that the clearances of the rings have been checked. Square the ring using a piston, examine gaps using a feeler gauge, and replace any out of spec rings. Clean up grooves, fasten rings in sequence, and fit gaps appropriately.

OEM 2005 Dodge Durango Piston Ring Set

Piston Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Piston Ring Sets found

View related parts
2005 Dodge Durango Piston Rings Part Number: 5012364AE
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size; Ring Kit Piston Standard
- Replaces: 5012364AC, 5012364AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.3 x 4.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012364AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Durango Piston Rings Part Number: 5086002AB
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086002AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Durango Submodels:
- Limited, SLT, ST | 8 Cyl 5.7 L GAS

2005 Dodge Durango Piston Ring Set Parts and Q&A

Q: How to Check Clearances and Install a Piston Ring Set on 2005 Dodge Durango?
A: Clean the cylinder bore and insert the ring 12mm below the bottom before re-installing or installing new rings, and checking that the clearances of the rings have been checked. Square the ring using a piston, examine gaps using a feeler gauge, and replace any out of spec rings. Clean up grooves, fasten rings in sequence, and fit gaps appropriately.