Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Dodge Neon ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2005 Dodge Neon ABS Control Module - 5093396AA
    2005 Dodge Neon ABS Control Module Diagram - 5093396AA
    View related parts

    2005 Dodge Neon Control Module Part Number: 5093396AA

    Product Specifications
    • Other Name: HCU - ABS; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; Modulator; Hydraulic Control Unit Anti-Lock Brake System
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5093396AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2005 Dodge Neon Submodels:
    • R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • 2005 Dodge Neon ABS Control Module - 5114087AA
    2005 Dodge Neon ABS Control Module Diagram - 5114087AA
    View related parts

    2005 Dodge Neon Control Module Part Number: 5114087AA

    Product Specifications
    • Other Name: Module - ABS; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; Modulator; Module Anti-Lock Brake System; Module Anti-Lock Brakes
    • Item Weight: 2.00 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5114087AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2005 Dodge Neon Submodels:
    • R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon ABS Control Module Parts and Q&A

  • Q: How to Service and Repair an ABS Control Module on 2005 Dodge Neon?
    A: Before serving the Electronic Brake Control Module, remove the negative battery cable and raise the car. Fist unplug the connector linking the pump/motor to the Cab, then use the screws to remove the Cab from the Hcu side of the Icu. Grip the lock of the Cab connector and pull it back to remove the 24-way wire connector and take the Cab away from the vehicle. To install, first join the 24-way wiring connector with the Cab and push in its lock. Put the Cab over the Hcu valves and slide it all the way into the Icu; install the four mounting screws and tighten them to 2 Nm (17 in. lbs.). Connect the pump/motor back to the air conditioning unit, pull up the vehicle and hook up the negative battery cable. Afterward, associate the Drbiii(R) to the car to begin the setup and check for errors, fixing them as you find them.

Related 2005 Dodge Neon Parts

Alternate Year Models

+
2004 Dodge Neon ABS Control Module