Other Name: Motor - Window Regulator; Power Window Motor, Front Left, Rear Left, Rear Right; Motor; Motor Window Regulator; Power Window Motor; Window Regulator
Position: Rear Passenger Side
Replaces: 5056031AC
Item Weight: 2.10 Pounds
Item Dimensions: 10.5 x 5.2 x 3.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5056031AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Other Name: Motor - Window Regulator; Power Window Motor, Front Right, Rear Right; Motor; Motor Window Regulator; Power Window Motor; Window Regulator
Position: Front Passenger Side
Replaces: 5056030AC
Item Weight: 2.00 Pounds
Item Dimensions: 9.5 x 6.4 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5056030AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2005 Dodge Neon Window Motor Parts and Q&A
Q: How to Maintain a Window Motor for the Front Door on 2005 Dodge Neon?
A: Before you work on the motor of the front door window, remove and disconnect the negative battery cable. If it's feasible, pull up the window all the way. Take out the front door trim piece and the water shield at the front of the door panel. Second, take out the screws holding the front door radio speaker to make room for the window motor to spin and then pivot the window motor clear of the door panel. Unscrew the three motor retaining screws and pull apart the motor from the drive cable assembly. ensnure the motor is firmly attached to the cable drive assembly using the provided retaining screws. After removing the radio speaker, install the front door radio speaker, place on the front door water shield and set the front door trim panel in place. After that, reattach the battery negative cable.