Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
2005 Jeep Grand Cherokee Door Hinge Parts and Q&A
Q: How to Maintain and Fix a Door Hinge on 2005 Jeep Grand Cherokee?
A: You should remove the door first if you want to fix the front door hinge. Draw two dots using a grease pencil or similar tool on the door where the door hinges 2 and 3 will be placed, so that your hinges are held in place. After that, unscrew the four nuts securing the front door hinges and take the hinges off. If you have to, unscrew and remove the washers 1 from each front door hinge. For body hinges, use a good sealant when reinstalling the hinges after removing or shifting them. Fix the hinges and bolts to the body according to the marks you drew before, tighten them until they reach 31 N.m (23 ft.lbs.) and only then position and reinstall the door.