How to Remove and Install the Rear Brake Line on 2006 Chrysler Crossfire?

It is necessary to first remove the wheel and tire assembly after raising and supporting the vehicle to replace the rear brake hose. Release the brake hose from both the brake line connection and the caliper and pull it off these spots. Link the brake hose to the brake line, put it behind the rear shock and connect it to the caliper for installation. After you are done, install the wheels and tires, lower the car and complete the process by flushing and bleeding the brakes.

OEM 2006 Chrysler Crossfire Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

View related parts
2006 Chrysler Crossfire Flex Hose, Rear Part Number: 5099245AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.4 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099245AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Flex Hose, Front Part Number: 68064313AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front, Rear; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 5099183AA, 68025215AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.2 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Brake Line Parts and Q&A

Q: How to Remove and Install the Rear Brake Line on 2006 Chrysler Crossfire?
A: It is necessary to first remove the wheel and tire assembly after raising and supporting the vehicle to replace the rear brake hose. Release the brake hose from both the brake line connection and the caliper and pull it off these spots. Link the brake hose to the brake line, put it behind the rear shock and connect it to the caliper for installation. After you are done, install the wheels and tires, lower the car and complete the process by flushing and bleeding the brakes.