How to Remove and Install a Rear Brake Disc on 2006 Chrysler Crossfire?

Support the vehicle by lifting it and then get rid of the wheel and tire assembly. After that, undo the mounting bolts and disconnect the caliper from the knuckle to support it and not damage the brake hose. Following this, get rid of the rotor retaining bolt and separate the rotor from the hub. Install the rotor onto the wheel hub and use the rotor retaining bolt to tighten it to a torque of 10 Nm. Put the caliper assembly back on the rotor and install the bolts that connect the caliper, tightening them to 55 Newton meters. Once the reinstallation is done, lower the car, pump the brake pedal until the brakes are set and then you can drive the car.

OEM 2006 Chrysler Crossfire Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Discs found

View related parts
2006 Chrysler Crossfire Rotor, Rear Part Number: 5135505AB
$56.78 MSRP: $122.00
You Save: $65.22 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: 5135505AA
- Item Weight: 16.50 Pounds
- Item Dimensions: 11.3 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135505AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Rotor, Front Part Number: 5135475AC
$156.47 MSRP: $284.00
You Save: $127.53 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaces: 5135475AB, 5135475AA
- Item Weight: 27.90 Pounds
- Item Dimensions: 13.6 x 13.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135475AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Rotor, Front Part Number: 5098064AC
$311.66 MSRP: $398.00
You Save: $86.34 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5098064AA, 5098064AB
- Item Weight: 19.40 Pounds
- Item Dimensions: 12.1 x 12.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098064AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Rotor Part Number: 5098063AA
Product Specifications
- Other Name: Rotor - Brake; Brake Rotor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098063AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Rotor, Rear Part Number: 68031811AA
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Brake Rotor
- Position: Rear
- Replaces: 5098066AA, 5098065AA
- Item Weight: 19.90 Pounds
- Item Dimensions: 11.2 x 11.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031811AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Brake Disc Parts and Q&A

Q: How to Remove and Install a Rear Brake Disc on 2006 Chrysler Crossfire?
A: Support the vehicle by lifting it and then get rid of the wheel and tire assembly. After that, undo the mounting bolts and disconnect the caliper from the knuckle to support it and not damage the brake hose. Following this, get rid of the rotor retaining bolt and separate the rotor from the hub. Install the rotor onto the wheel hub and use the rotor retaining bolt to tighten it to a torque of 10 Nm. Put the caliper assembly back on the rotor and install the bolts that connect the caliper, tightening them to 55 Newton meters. Once the reinstallation is done, lower the car, pump the brake pedal until the brakes are set and then you can drive the car.