How to Service a Camshaft Position Sensor on 2006 Chrysler Crossfire?

In order to service the camshaft position sensor, unconnect the negative battery cable and sensor harness connector. Take out the retaining bolt and sensor. Check and lubricate the O-ring; after this, put the sensor back, tighten with 8 N.m. Lastly, reconnect the harness and the battery cable.

OEM 2006 Chrysler Crossfire Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2006 Chrysler Crossfire Camshaft Position Sensor Part Number: 68102591AA
$164.29 MSRP: $242.00
You Save: $77.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 68430062AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 4.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68102591AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Camshaft Sensor Part Number: 68430062AA
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor
- Replaces: 5137706AA, 68102591AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430062AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Camshaft Position Sensor Parts and Q&A

Q: How to Service a Camshaft Position Sensor on 2006 Chrysler Crossfire?
A: In order to service the camshaft position sensor, unconnect the negative battery cable and sensor harness connector. Take out the retaining bolt and sensor. Check and lubricate the O-ring; after this, put the sensor back, tighten with 8 N.m. Lastly, reconnect the harness and the battery cable.