How to Maintain the Upstream Oxygen Sensor on 2006 Chrysler Crossfire?

Disconnect the negative battery cable at the beginning, before proceeding to service the upstream O2 sensor. Both corners of the engine cover must be grasped flatly, then lifted without strain. After that, detach the electrical harness on the O2 sensor and remove the actual sensor from its place (1). Don't forget to put anti-seize on the bolt before tightening it by hand to 50 N.m (37 ft. lbs.). Fit the engine cover into place by lining up the retaining clips with the rubber mounts and pushing hard. Using a little lubricant on the rubber mounts will help with the installation of the engine cover. After all the checks, put back the negative battery cable.

OEM 2006 Chrysler Crossfire Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oxygen Sensors found

View related parts
2006 Chrysler Crossfire Oxygen Sensor, Rear Passenger Side Part Number: 5099821AA
$75.42 MSRP: $985.00
You Save: $909.58 (93%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear Right; Sensor Oxygen
- Position: Rear Passenger Side
- Replaces: 5099821AB, 5099821AC
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.8 x 4.2 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099821AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Oxygen Sensor, Rear Driver Side Part Number: 5099817AA
$572.81 MSRP: $816.00
You Save: $243.19 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear Left; Lambda Sensor; Sensor Oxygen
- Position: Rear Driver Side
- Replaces: 5099817AB, 5099817AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.5 x 4.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099817AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Oxygen Sensor, Front Part Number: 5099820AA
$496.00 MSRP: $1060.00
You Save: $564.00 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Lambda Sensor; Sensor Oxygen
- Position: Front
- Replaces: 5099820AC, 5099820AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 4.2 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099820AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Oxygen Sensor Part Number: 5099816AA
Product Specifications
- Other Name: Sensor - Oxygen
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.2 x 4.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099816AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Oxygen Sensor Part Number: 5099818AA
Product Specifications
- Other Name: Sensor - Oxygen
- Replaces: 5099818AC, 5099818AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.4 x 4.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099818AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Oxygen Sensor Parts and Q&A

Q: How to Maintain the Upstream Oxygen Sensor on 2006 Chrysler Crossfire?
A: Disconnect the negative battery cable at the beginning, before proceeding to service the upstream O2 sensor. Both corners of the engine cover must be grasped flatly, then lifted without strain. After that, detach the electrical harness on the O2 sensor and remove the actual sensor from its place (1). Don't forget to put anti-seize on the bolt before tightening it by hand to 50 N.m (37 ft. lbs.). Fit the engine cover into place by lining up the retaining clips with the rubber mounts and pushing hard. Using a little lubricant on the rubber mounts will help with the installation of the engine cover. After all the checks, put back the negative battery cable.