How to Service a Knock Sensor on 2006 Chrysler Pacifica?

In order to maintain the knock sensor, unscrew the negative battery cable and the upper intake manifold. Install a sensor, clench it to 20 N.m (15.2 in. lbs.) and install the wire properly, and reinstall the manifold. Lastly, rejoin the electric connector and the negative battery cable.

OEM 2006 Chrysler Pacifica Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2006 Chrysler Pacifica Knock Sensor Part Number: 4606093AF
$119.31 MSRP: $182.00
You Save: $62.69 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Throttle Sensor; Sensor Knock
- Replaces: 4606093AC, 4606093AE
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 3.4 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX | 3.8L V6, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Knock Sensor Parts and Q&A

Q: How to Service a Knock Sensor on 2006 Chrysler Pacifica?
A: In order to maintain the knock sensor, unscrew the negative battery cable and the upper intake manifold. Install a sensor, clench it to 20 N.m (15.2 in. lbs.) and install the wire properly, and reinstall the manifold. Lastly, rejoin the electric connector and the negative battery cable.