How to Service and Repair a MAP Sensor on 2006 Chrysler Pacifica?

To repair the Manifold Pressure/Vacuum Sensor, disconnect the negative battery cable, remove the electrical connector and bolt and then the sensor. For installation purposes, screw the new sensor to the intake manifold with a torque of 4.5 n.m, re-connect the electrical connector and reinstall the battery cable.

OEM 2006 Chrysler Pacifica MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Chrysler Pacifica M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Pacifica M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS

2006 Chrysler Pacifica MAP Sensor Parts and Q&A

Q: How to Service and Repair a MAP Sensor on 2006 Chrysler Pacifica?
A: To repair the Manifold Pressure/Vacuum Sensor, disconnect the negative battery cable, remove the electrical connector and bolt and then the sensor. For installation purposes, screw the new sensor to the intake manifold with a torque of 4.5 n.m, re-connect the electrical connector and reinstall the battery cable.