How to Maintain a Seat Switch on 2006 Chrysler PT Cruiser?

The first step in service is to break and isolate the negative cable from the battery. After that, undo the two screws holding the left cushion side shield in place and pull the wiring from the switch. Following that, remove the screws that connect the switch to the bezel and take it out. Make sure the switch ends up in the bezel and use the two supplied screws to link it. Fit the wire cables to the switch and then connect the screws to the left side of the cushion shield. After that, return the battery cable to the negative terminal and inspect the system's operation.

OEM 2006 Chrysler PT Cruiser Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Switch found

View related parts
2006 Chrysler PT Cruiser Seat Switch, Front Part Number: 4602697AA
$58.65 MSRP: $87.90
You Save: $29.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Front; Switch; Switch Power Seat; Power Seat Switch
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602697AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2006 Chrysler PT Cruiser Seat Switch Parts and Q&A

Q: How to Maintain a Seat Switch on 2006 Chrysler PT Cruiser?
A: The first step in service is to break and isolate the negative cable from the battery. After that, undo the two screws holding the left cushion side shield in place and pull the wiring from the switch. Following that, remove the screws that connect the switch to the bezel and take it out. Make sure the switch ends up in the bezel and use the two supplied screws to link it. Fit the wire cables to the switch and then connect the screws to the left side of the cushion shield. After that, return the battery cable to the negative terminal and inspect the system's operation.