How to Remove and Install a Crankshaft in an Engine on 2006 Chrysler Sebring?

To take off the crankshaft; loosen the engine off the car and disconnect the transaxle. Empty oil, take out all parts and label connecting rod caps. Removability is to be done carefully, checking on wear and proper installation of bearings and seals. Install the engine again and all the bolts should be properly torqued.

OEM 2006 Chrysler Sebring Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshafts found

View related parts
2006 Chrysler Sebring Crankshaft Part Number: 4781643AA
$539.13 MSRP: $818.00
You Save: $278.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft; Crankshaft Includes Target Ring And Screw
- Item Weight: 47.80 Pounds
- Item Dimensions: 24.5 x 8.8 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781643AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2006 Chrysler Sebring Crankshaft Part Number: 4663638
$1000.64 MSRP: $1485.00
You Save: $484.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft
- Item Weight: 51.50 Pounds
- Item Dimensions: 22.5 x 8.0 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663638
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Crankshaft Parts and Q&A

Q: How to Remove and Install a Crankshaft in an Engine on 2006 Chrysler Sebring?
A: To take off the crankshaft; loosen the engine off the car and disconnect the transaxle. Empty oil, take out all parts and label connecting rod caps. Removability is to be done carefully, checking on wear and proper installation of bearings and seals. Install the engine again and all the bolts should be properly torqued.