How to Service and Repair a Front Crankshaft Seal on 2006 Chrysler Town & Country?

The process for a front crankshaft seal repair starts by unclipping the negative battery cable and raising the vehicle on a hoist. The process starts by taking off the right wheel and inner splash shield, next comes removing the accessory drive belt and crankshaft damper. Put Special Tool 6341A on the crankshaft nose, gently insert it into the seal and tighten it until it locks, taking care not to harm the cylinder head's crankshaft seal surface. Put the forcing screw in reverse until the oil seal is no longer attached to the cover. Put Special Tool C-4992-2 Guide on the crankshaft nose and cover it with the new seal, so the seal spring is visible next to the engine front cover. Use Special Tool C-4992-1 to install the seal until it matches the level of the cover. Replace the crankshaft damper, the accessory drive belt, the inner splash shield and the right front wheel. After that, lower the vehicle and put the negative cable back onto the battery.

OEM 2006 Chrysler Town & Country Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2006 Chrysler Town & Country Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Town & Country Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Mark Cross, SX, Touring | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Town & Country Rear Main Seal Part Number: 4654389AB
$26.69 MSRP: $30.65
You Save: $3.96 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Rear Main Seal Retainer; Includes Rear Seal and Crankshaft Rear Oil Seal.
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.3 x 6.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4654389AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Town & Country Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Front Crankshaft Seal on 2006 Chrysler Town & Country?
A: The process for a front crankshaft seal repair starts by unclipping the negative battery cable and raising the vehicle on a hoist. The process starts by taking off the right wheel and inner splash shield, next comes removing the accessory drive belt and crankshaft damper. Put Special Tool 6341A on the crankshaft nose, gently insert it into the seal and tighten it until it locks, taking care not to harm the cylinder head's crankshaft seal surface. Put the forcing screw in reverse until the oil seal is no longer attached to the cover. Put Special Tool C-4992-2 Guide on the crankshaft nose and cover it with the new seal, so the seal spring is visible next to the engine front cover. Use Special Tool C-4992-1 to install the seal until it matches the level of the cover. Replace the crankshaft damper, the accessory drive belt, the inner splash shield and the right front wheel. After that, lower the vehicle and put the negative cable back onto the battery.