How to Install and Remove Piston Assemblies in an Engine on 2006 Chrysler Town & Country?

To disassemble piston and connecting rod assemblies, disconnect battery, take off cylinder heads and oil pan and ridge reamer as necessary. Check and remove every assembly, and install using staggered ring gaps and lubricate. Label the marks, attach the rod caps, and replace components, and lastly, fill with oil and reconnect the battery.

OEM 2006 Chrysler Town & Country Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pistons found

View related parts
2006 Chrysler Town & Country Piston Part Number: 4666129AA
$233.40 MSRP: $347.00
You Save: $113.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 5019338AB
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.6 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666129AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- EL, EX, Limited, LX, LXi, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Town & Country Piston Part Number: 4666130AB
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 4897772AB, 4666130AA
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666130AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, Limited, LX, LXi, Touring | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2006 Chrysler Town & Country Piston Parts and Q&A

Q: How to Install and Remove Piston Assemblies in an Engine on 2006 Chrysler Town & Country?
A: To disassemble piston and connecting rod assemblies, disconnect battery, take off cylinder heads and oil pan and ridge reamer as necessary. Check and remove every assembly, and install using staggered ring gaps and lubricate. Label the marks, attach the rod caps, and replace components, and lastly, fill with oil and reconnect the battery.