How to Maintain an Oxygen Sensor on 2006 Dodge Durango?

Always be sure to raise and support your vehicle for sensor servicing. Take note not to pull the wire when you disconnect the wire connector from the O2S sensor. Take the oxygen sensor out with help from an O2S removal tool and then clean the threads in the exhaust with the right tap. Keep in mind that when fitting a new oxygen sensor, its threads have anti-seize compound and you don't need to apply more yourself. After installing the O2S sensor, tighten it to 22 ft. lbs. (30 N.m), then plug the O2S sensor wire connector back in before bringing the vehicle down again. Cool the engine before you remove the oxygen sensor and never smear grease on or try to solder the connector for the sensor.

OEM 2006 Dodge Durango Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oxygen Sensors found

View related parts
2006 Dodge Durango Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Oxygen Sensor, Front Passenger Side Part Number: 56028994AB
$79.61 MSRP: $119.00
You Save: $39.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right; Front Oxygen Sensor; Upper Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.9 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028994AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Oxygen Sensor, Front Passenger Side Part Number: 56028994AA
$151.61 MSRP: $225.00
You Save: $73.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.6 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028994AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Oxygen Sensor, Front Driver Side Part Number: 56028998AB
$94.67 MSRP: $141.00
You Save: $46.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 5.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028998AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Durango Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Oxygen Sensor, Rear Part Number: 56028999AB
$197.65 MSRP: $294.00
You Save: $96.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.2 x 1.6 x 20.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028999AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Durango Oxygen Sensor Parts and Q&A

Q: How to Maintain an Oxygen Sensor on 2006 Dodge Durango?
A: Always be sure to raise and support your vehicle for sensor servicing. Take note not to pull the wire when you disconnect the wire connector from the O2S sensor. Take the oxygen sensor out with help from an O2S removal tool and then clean the threads in the exhaust with the right tap. Keep in mind that when fitting a new oxygen sensor, its threads have anti-seize compound and you don't need to apply more yourself. After installing the O2S sensor, tighten it to 22 ft. lbs. (30 N.m), then plug the O2S sensor wire connector back in before bringing the vehicle down again. Cool the engine before you remove the oxygen sensor and never smear grease on or try to solder the connector for the sensor.