How to Service an Oil Pressure Switch on 2006 Dodge Durango?

To start, disconnect the negative battery terminal and lift the vehicle on a hoist before you continue. Take out the splash shield at the front and unplug the oil pressure sender connector (4). Once that's done, take out the pressure sender component (2). You should start by installing the oil pressure sender and secure its corresponding wire. After the shield is ready, bring down the car and finish with reconnecting the negative battery cable.

OEM 2006 Dodge Durango Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2006 Dodge Durango Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, Express, GT, Heat, Limited, Limited Hybrid, R/T, Rallye, SE, SLT, SXT, Special Service | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Durango Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2006 Dodge Durango?
A: To start, disconnect the negative battery terminal and lift the vehicle on a hoist before you continue. Take out the splash shield at the front and unplug the oil pressure sender connector (4). Once that's done, take out the pressure sender component (2). You should start by installing the oil pressure sender and secure its corresponding wire. After the shield is ready, bring down the car and finish with reconnecting the negative battery cable.